Jump to content
Sign in to follow this  
Snowman6.0

Kohler k141

Recommended Posts

Snowman6.0

I'm restoring a 633 and looking for a rebuild kit anybody have any suggestions where to find one

Share this post


Link to post
Share on other sites
 
rmaynard

What type of rebuild kit are you looking for, just gaskets, or do you want everything including valves, rods, pistons, etc.?

Share this post


Link to post
Share on other sites
 
Snowman6.0

I have new valves looking for piston, rings and rod. I see you can pick up the gasket and seals in a kit about anywhere

Share this post


Link to post
Share on other sites
 
rmaynard

Have you had the engine spec'd at a machine shop to see if you need those items? If so, do you need standard size, or oversize piston/rings? Standard or undersize rod?

Share this post


Link to post
Share on other sites
 
Snowman6.0

I need a + .10 piston and .10 rod the machine shop has the motor now

Share this post


Link to post
Share on other sites
 
rmaynard

Does your engine have a 2-7/8" or 2-15/16" bore?

Share this post


Link to post
Share on other sites
 
Snowman6.0

2-7/8"

Share this post


Link to post
Share on other sites
 
rmaynard

That may be a tough one to find a piston and rings for. Let's let some others chime in here and see if they have any ideas. I would ordinarily suggest doing a Google search, but I came up empty when I did a quick look there and on eBay.

Share this post


Link to post
Share on other sites
 
Ken B

Have you verified that you have a working ignition system with a good coil? The coils for these K141's are a little hard to come by and very pricey. I've been looking for a coil for mine for a while now. If the coil is no good ya better add that to the list.

Edited by Ken B

Share this post


Link to post
Share on other sites
 
Snowman6.0

The coil works fine it just had a bad exhaust valve and has some scoring in the cylinder

Share this post


Link to post
Share on other sites
 
rmaynard

I will refer you to this post from last year.

 

Share this post


Link to post
Share on other sites
 
Snowman6.0

Hey thanks for the info and help guys. Looks like I'm going to be taking more off the bore. Know I know why I stayed in the 12hp-16hp lol

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...