Mower deck Id help - C-100

[ron.cieri.313 0]

Hi all...I have a '75 Wheel Horse C-100 8-speed...getting started on restoring the deck and need to order parts but of course, I do not see any model identification number on the mower deck...here's what I know:

 

• Side discharge deck that rides directly underneath the tractor
• 2 larger side wheels (about 5 3/4" dia.)
• 5 rollers (2 3/4" dia.)
• Deck width...well if i don't count the part of the metal housing that serves as the shoot, i'd say 42"; longer if you count the entire housing
• Blades: 13 3/4" length x 2" wide; 3 of them

...what do you think? can it be ID'd from this info or do we need pics...thanks!...ron.

 

[groundhog47 347]

5-1011 42 sd is one listed but could easily have an interchange, what type spindels, greaseable or not and are shafts doudle d or just 3/4' round. If got a 76 with a 77 retrofit spindle group. Will get back, but see if you can find the tag and a lngth on blades, 42" approx13 7/8 point to point

 

It could also be (1) 65-42MS01 superceded modle or (2) 15-42SC03/78345 current model as shows in interchange manual here. It could also be 36" measuring blades is a good tell

(1) has 3 front rollers, 4 rear rollers, 2 adj wheels, double d shafts and pulleys and solid belt cover originally per Toro diagram

(2) has three front rollers, two back rollers and two adj wheels, belt guard is two piece and mounts on a removeable deck reinforcement plate and round spindel shafts appear unkeyed per Toro parts diagram 

Can't locate 5-1011 drawing

Edited March 15, 2013 by groundhog47

[Sparky-(Admin) 23,806]

If its original it would be this one. I copied this off the TORO site.

5-1011 42" Side Discharge Mower Current Model Available: 15-42SC03/78345 Original Model Supersedes To: 65-42MS01

 

 

Mike..................

[KATO 115]

here's a link to part's and drawing of 5-1011 deck

 

http://www.partstree.com/parts/?lc=toro+consumer&mn=5-1011

Edited March 15, 2013 by KATO

[gwest_ca-(File Mod) 11,757]

The Toro site is good but misses many of the models between those listed

 

5-1011 [V spindle greaseable metric] replaces [X spindle greaseable standard] replaces [K spindle non-greaseable]

 

Replaces RL-426, 5-1421, 5-1422, 5-1423, 5-1000, 5-1001, 5-1010

 

Replaced by 5-1012, 65-42MS01, 65-42MS02, 75-42MS01, 75-42MS02, 85-42MS01, 95-42MS00, 95-42MS01, 05-42MS01, 05-42MS02, 05-42MS03, 05-42MS04, 05-42MS05, 15-42SC01, 15-42SC02, 15-42SC03/78345

 

To identify the spindles

 

Garry

[ron.cieri.313 0]

Thanks everyone...that sure looks like the one...appreciate the help...ron

[Forest Road 594]

I have a full set of used spindles. PM me for info