Stormin 9,976 #1 Posted March 4, 2013 Put the cutter deck on my C125 today and did the first cut of the green. Nice to be back in the saddle. Share this post Link to post Share on other sites
meadowfield 2,545 #2 Posted March 4, 2013 Show off! Just about dry enough to walk on now, not mowing weather yet.... Share this post Link to post Share on other sites
wheeledhorseman 573 #3 Posted March 4, 2013 Oh the weather outside is frightful But the fire is so delightful And since we've no urge to mow Let It Grow! Let It Grow! Let It Grow! Got some seat time pulling the roller round though - the ground's finally just right for that though still boggy in a few places. Andy Share this post Link to post Share on other sites
Stigian 1,234 #4 Posted March 5, 2013 I did the first cut of the year yesterday too, its nice to see it looking er... A lot less long than it was.. Trouble is I now have a lot of cut grass to rake up!! Oh well.. Share this post Link to post Share on other sites
AMC RULES 36,961 #5 Posted March 5, 2013 Lucky ducks...still snowing here on the other side of the pond. Share this post Link to post Share on other sites
Lars 526 #6 Posted March 5, 2013 Well i have to wait 2-2.5 mnd's more before i can mowe.. i still have alot of snow, the gorund is frozen and 12-15 inch of snow.. Share this post Link to post Share on other sites
KATO 115 #7 Posted March 5, 2013 Must be nice!! Wont be any mowin for me until the end of April. Still buried under feet of snow. And likely to get more yet . Share this post Link to post Share on other sites
Anglo Traction 759 #8 Posted March 5, 2013 Yep !. I joined the First Cut Club today. Weather superb . Managed to top the tallest areas , so about 1/2 an Acre. Spent the rest of the time clearing out the Former Piggery Outbuildings. Rescued the 40 year old Pump that had been left out in the elements for 35 years . Had to set to it with the Angle Grinder to remove it. Got home , fired up the 'Putor' and searched for the Makers Name. 'Voila' Parts still available. Nice big 1inch BSP Bronze and Stainless Pump. That's going on one of the Tractors. Share this post Link to post Share on other sites
VinsRJ 721 #9 Posted March 5, 2013 Cutting!?!... None of that for a while for me. Share this post Link to post Share on other sites
Stigian 1,234 #10 Posted March 7, 2013 Don't put your snowplows away quite yet chaps, it''s looking like next week could be a lot whiter in the UK again!!! Share this post Link to post Share on other sites
Stormin 9,976 #11 Posted March 7, 2013 I'm not putting mine back on until it snows. That way we might get some and I can try it out. Chucking it down with rain now though. Just had a sudden thought. Flotation tyres sprang to mind. Anyone built an amphibious Wheel Horse? Share this post Link to post Share on other sites
Stigian 1,234 #12 Posted March 8, 2013 Stormin, if you fill your tire up with laughing gas and set the valves to leak slightly, you could make everyone very happy just by driving past them Then again I may of had too much coffee this morning to come up with a comment like that... He says while going in search of the kettle again Share this post Link to post Share on other sites
