skip150 7 #1 Posted March 2, 2013 Can anyone tell me the dimensions of the plate mounting bracket part no.4123 on the BDR-385. Need to make my own Guess the old man lost them years ago Thanks Skip Share this post Link to post Share on other sites
littleredrider 408 #2 Posted March 2, 2013 If it's the ones that bolt to the side of the frame, like a later tach-a-matic, they are the same dimensions as said plates, just with a 3/4" hole instead of being slotted and with a lever to hold it in place.. Share this post Link to post Share on other sites
skip150 7 #3 Posted March 2, 2013 Yes they do bolt to the frame do u know where I can get the dimensions? Share this post Link to post Share on other sites
roscoemi 245 #4 Posted March 2, 2013 See if this thread helps. Share this post Link to post Share on other sites
littleredrider 408 #5 Posted March 4, 2013 I have my plates somewhere, if you need I can get some pics with a tape.... Share this post Link to post Share on other sites
skip150 7 #6 Posted March 4, 2013 thanks little rider I schould be good with the pics roscoemi posted Thanks Skip Share this post Link to post Share on other sites