kpinnc 14,651 #1 Posted August 4, 2008 Took the belt guard off yesterday, and there is something wierd under there... My drive belt is VERY thin, top to bottom. The width of the belt looks like the normal 5/8, but it's just about 1/4 thick. Is this the norm on a 520, or did someone just put something weird on this thing? Kevin Share this post Link to post Share on other sites
DMESS 24 #2 Posted August 4, 2008 Width is 21/32, but the height has to be more than 1/4". Part number is 114895, but I can't find any more specs yet. Where's TT when you need him! B) Share this post Link to post Share on other sites
linen beige 15 #3 Posted August 4, 2008 My belt chart calls for part number 114895. 82.95 inch length, cross section HB, 21/32 width, 13/32 height. That's only 1/32 wider than 5/8ths, but 5/32 higher than 1/4. Sounds like your belt is either REALLY worn, or someone has put on the wrong belt. Share this post Link to post Share on other sites
DMESS 24 #4 Posted August 4, 2008 Whew, thanks for the extra info Jim! I need one of those charts, LOL! Share this post Link to post Share on other sites
Curmudgeon 28 #5 Posted August 4, 2008 Lubrication Recommendations Drive Belt & Mower Blade Usage Charts part number 492-0392 Share this post Link to post Share on other sites
Buzz 502 #6 Posted August 4, 2008 Lubrication Recommendations Drive Belt & Mower Blade Usage Charts part number 492-0392 I have that in pdf. Anyone wants it PM me their email and I'll send it to you Share this post Link to post Share on other sites
