Kevbo 80 #1 Posted February 14, 2013 Hey guys I have the spindles off my 48" RD and they are pretty dirty...I want to clean them without tearing them apart...I assume Purple Power and water and is a BAD idea lol so what do you all recommend? Take a look: Thanks in advance! Share this post Link to post Share on other sites
Trouty56 565 #2 Posted February 14, 2013 Me....I'd power wash them and pump some grease in them. Share this post Link to post Share on other sites
Tankman 3,515 #3 Posted February 14, 2013 Me....I'd power wash them and pump some grease in them. That's all they're going to need. You will want to clean the shafts some, emery cloth. Of course, new hardware during installation. I would use stainless steel and Never-Seez® fo' sure! 1 Share this post Link to post Share on other sites
