Pilot101 2 #1 Posted February 11, 2013 I have attached a picture off google images. I believe this set up is what I'm looking for. I have an H60-75267G Tec. I have the throttle cable and the linkage rod connecting the carb throttle to the top of governor arm. I need the assembly which attaches to the starter blower housing. I think there is another type assembly which bolts to the top of the cylinder head. I am not looking to get to the original necessarily just looking for something that will work and that I can find the parts. I have a 1961 551. The first pic is not my engine. It's the throttle linkage assembly I am looking for. Share this post Link to post Share on other sites
Pilot101 2 #2 Posted February 11, 2013 Correction. The first engine is mine, the second pic is the assembly pic I believe will work. Sorry for the error Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #3 Posted February 11, 2013 I know you have been very patient up to this point...... If you can wait just a few more days, I can look through my stuff and see what I have. Share this post Link to post Share on other sites
Callen 64 #4 Posted February 11, 2013 The throttle linkage in the lower pic over rides the governor. There needs to be a spring in place of the vertical solid rod behind the fuel line in that pic. Share this post Link to post Share on other sites
Callen 64 #6 Posted February 12, 2013 Guess there is one there. Took 4x on my magnafier to see it. Sorry I butted in.... :text-imsorry: Share this post Link to post Share on other sites
sorekiwi 761 #7 Posted February 12, 2013 That second pic is actually my motor, from my 502. As Terry stated there is a spring, as shown in his picture of your picture, of my picture! I may have some pieces of that style of linkage, I am fairly sure that the '63 Ranger used it as well. I'll have to dig around and see what I can find. Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #8 Posted February 18, 2013 Not sure if you're still paying attention, but I finally made it to the shop and found absolutely nothing that will help you. Share this post Link to post Share on other sites
Pilot101 2 #9 Posted February 19, 2013 Thanks TT. I believe someone came up with one. It is being shipped now. Thanks for all your help Share this post Link to post Share on other sites
