Retired Wrencher 5,833 #1 Posted February 2, 2013 :USA: Do any you think this will be a problem with balance let me know..... Thanks Gary B... Share this post Link to post Share on other sites
rmaynard 16,350 #2 Posted February 2, 2013 In my opinion, yes, it will be a problem. Flywheels are cheap and readily available. Please read other threads on the same subject such as Share this post Link to post Share on other sites
Anglo Traction 761 #3 Posted February 2, 2013 (edited) I know of one person who has ground off the opposite Fin to re-balance a Flywheel (in UK)and he still has his Foot and Leg (so far). I personally would Junk it and replace it. You'll have an advantage over there of several offers for one and they appear to be plentiful and cheap(unlike in UK). Prevention is better than a cure!. Edited February 2, 2013 by Anglo Traction Share this post Link to post Share on other sites
Wheel-N-It 2,976 #4 Posted February 3, 2013 (edited) Too dangerous to reuse. Dont throw it away if there are magnets inside, you may need them at a later time. Do buy another good used flywheel. Edited February 3, 2013 by Wheel-N-It Share this post Link to post Share on other sites
Retired Wrencher 5,833 #5 Posted February 3, 2013 :USA: Well I remembered that i had an old Jacobson 8hp for parts Wheeuew. that saved the day I am glad that I bought that old seized up engine now for $10. the only difference there is 5 holes in the one i took off the Jac and the original only had 3. Also if any of you need that rare pulley let me know I can send it to you.. Take /care Gary B...... Share this post Link to post Share on other sites
