Jump to content
Sign in to follow this  
Mr. 856

Need a shop in CT to rebore a K181S

Recommended Posts

Mr. 856

Hi Im new here and was wondering if anyone can lead me in the right direction to a shop in CT that can measure my cylinder bore and then most likely bore it to the next size. I believe its original bore now. Found one shop that bores but they only do car engines. I dont have the needed tools to do the measuring but im going to assume a rebore and new piston and rings are in order. Need to get this done sooner then later. I have engine down to the block and ready for measuring. I can drop off or ship block to another state if needed. Would like to deal with a reputable shop and not someone whos looking to practice. LOL Any helpe would be appreciated. MY 856 is on its way back together after some fresh paint. Need the engine done ASAP.

Share this post


Link to post
Share on other sites
 
VinsRJ

Welcome to Red Square... where-a-bouts are you located in CT?

Sorry, just noticed you're located in Suffield... try Precision Auto in Granby... its right across the street from small the fly in air port... I've had a couple Kohlers and Clinton Engines machined there.

Edited by VinsRJ

Share this post


Link to post
Share on other sites
 
Mr. 856

Thanks I will give them a shout. Thats not to far from where I work go figure. Thanks!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...