Snow Plow Side-to-Side Movement

[WheelHorseSteve 56]

Hello all --

I have been searching -- without avail -- for pictures of the modification that folks have done off the mule drive mount to prevent side-to-side movement / twisting of the snow plow. It seems like something that Wheel Horse should have provided.... I have to think that the play will otherwise wear the rear mount / plow over time and puts lateral stress on the lift mechanism. I'd like to take on this modification.

Thanks in advance!

-Steve

[Don1977 605]

Take a look at this:

[bk-scouter 93]

Don, thanks for posting that. I've forgotten about that modification and would like to have one made for my plow.

-BK

[TT-(Moderator) 1,162]

It seems like something that Wheel Horse should have provided....

They eventually did - on blade frames for a few other models. Here's a clip from the IPL for a 79355 dozer blade:

[WheelHorseSteve 56]

Thanks so much, guys! I need to work on my searching skills... was trying "plow support" "plow bracket" etc.. Looks like "plow modification" would have done it!

Cheers!

[MalMac 1,333]

I can see where these anti side-to-side movement brackets would work. I myself have never really had a problem with it. Maybe it's something I should have been and need to keep an I on. I have been plowing for several years and have not had any effects from side-to-side or have seen any undo wear from it. I wonder if doing certain maneuvers with the blade down while trying to turn does it? Must have been a issue for the XI series for them to warrant putting a anti sway bracket on.

[shallowwatersailor 3,216]

Here are photos of the 5xi application.

It does seem to help and is also easy to attach.

[jusjeepn 59]

Here's what I used on my 60" blade build.

Blade down

Blade up

[Hydro 131]

centering pin with a weight bracket