Callen 64 #1 Posted January 8, 2013 Will the front frame section from a 308-8 fit a 520? Chester Share this post Link to post Share on other sites
jdog_kustoms 82 #2 Posted January 8, 2013 If u are talking the attach a matic on the front yes it will Sent from my PC36100 using Tapatalk 2 Share this post Link to post Share on other sites
Callen 64 #3 Posted January 9, 2013 jdog, I was trying to ask about the frame from the tranny mount forward. sorry for the confusion. Share this post Link to post Share on other sites
jdog_kustoms 82 #4 Posted January 9, 2013 the 520 is the same but it has the extra support on the rear were it bolts to the tranny and the 520s with the gear reduction sterring have extra holes in the frame Share this post Link to post Share on other sites
ericj 1,579 #5 Posted January 9, 2013 as jdog said above they are the same except the reinforced plate at the trans mount and the extra hole for the gear reduction steering. there would be no difference for 88, 89 and not sure about 90. when i get a chance i will check my 90 and see eric j Share this post Link to post Share on other sites
