Finally found a blade for my 267H

[jcg1112 2]

Finally found and bought a blade and weights for my 267!!. Thanks to gwest and Kelly for their help on my previous post about compatibility. Does anyone have a manual for this model - 79252? Didn't see one in the manuals section. Would be much appreciated. Will try to post pics tomorrow as I have a couple questions about mounting bolts for the weights and the rear blade mounting bracket that came off the tractor it was mounted on.

Thanks again.

[rexman72 210]

becareful with putting to much stress on that tractor as the tranny isnt like some of the heavy duty trannys

[jcg1112 2]

You're right Rexman. Just going to push some snow and in warm weather some light duty dirt work. I've got my 320 for the heavy stuff. Still keeping an eye out for a heavy duty horse. The guy I bought the blade from also had a 417-8, but not for sale.

[Tankman 3,515]

You can take a peek-a-boo at Partstree for starters; http://www.partstree...nsumer&mn=79252

Download #3316-515 Rev A=OM from Toro Request Manuals 1106KB pdf 16 pages

Use 4912345 for a serial number

[jcg1112 2]

Tankman, thanks a bunch for the info. This is exactly what I was looking for! It answers the questions I've had so far. It looks like I've got all the parts except for a couple of clevis pins and cotters for the rear hitch levers. No big deal there. Gonna wait til it's a little warmer before I spend time in the pole barn working on this. It was a balmy 12 deg earlier. Sat looks ok. Thanks again.