Dieselcowboy 210 #1 Posted December 26, 2012 Anyone know the size of the wings of a 36" snow blower? I think I may cut some out to install before our snow tomorrow. Of course they are 36 X ? Share this post Link to post Share on other sites
Wishin4a416 2,189 #2 Posted December 26, 2012 13.5 high x 9 long with a 45 on the end which should end up close to a 42 inch cut. 45 is about 1.5 inches. Share this post Link to post Share on other sites
littleredrider 408 #3 Posted December 26, 2012 I can get you the measurements tomorrow if you don't get some tonite. Pretty much just flat pieces of steel... Share this post Link to post Share on other sites
can whlvr 991 #4 Posted December 26, 2012 just remember to put the angled side towards the inside,if you get them backwards it will pull the blower apart after it hooks snow banks enough,the angle inside it pushes inward,so its not nearly as hard on the body of the thrower Share this post Link to post Share on other sites
whbob2 1 #5 Posted December 27, 2012 I may have an extra set of wings. I will sell them for shipping costs plus $5.00. Share this post Link to post Share on other sites
