nhwheelhorse 0 #1 Posted July 30, 2008 B) i put the whole thing together and well after looking around the shop,i notice a piece.the manual says it is a wire chanel but for the life of me i can not figure out were it goes. if i could figure out how the camera setup and computer thing works i could post pictures.sorry about the screwy wording new to the whole chat world.but am glad i figured this much out.oh yeah on the b80 no otheers have it that i have so would not be asking if i had a clue .once again sorry for the stupid question and thank you for your time in advance. B) Share this post Link to post Share on other sites
TT-(Moderator) 1,156 #2 Posted July 30, 2008 The wire channel bolts under the left side of the gas tank tray and points forward toward the engine. The chassis-to-engine wiring and the fuel line are normally secured to the channel. Green arrow points to location: Share this post Link to post Share on other sites
nhwheelhorse 0 #3 Posted July 30, 2008 ok thanks again for the fast reponse and knowledge.if you do not mind me picking you brain again tt , where do your wires for the clutch switch run ? i have them on the under side of the foot rest then up and over but do not like them there Share this post Link to post Share on other sites
TT-(Moderator) 1,156 #4 Posted July 30, 2008 Before the clutch safety switch was bypassed on mine, the wires used to pass between the battery and the starter. Share this post Link to post Share on other sites