The Toolman 22 #1 Posted December 8, 2012 Besides the blower cover tag. Thanx 1 Share this post Link to post Share on other sites
Kelly 1,028 #2 Posted December 8, 2012 Some blocks NOT ALL of them on the PTO side of the block just above the crank will have K301 cast into it,(same as many other blocks with their size) BUT some 10hp K241 used the K301 block just not bored as far, other than that there is no way with out pulling the head and checking the bore size. Share this post Link to post Share on other sites
Don1977 604 #3 Posted December 8, 2012 My K-301 has E 16 cast in the block the only one you can tell from the out side is a 10 bolt head on a K-341. Share this post Link to post Share on other sites
The Toolman 22 #4 Posted December 8, 2012 Thanx Guys, I'll just hafta wait until I take the head off sometime. Its on my 112 JD that the guy lied to me about everything. Says he rebuilt the engine too, but it could be a 10 hp for all I know. Share this post Link to post Share on other sites