Cut those old Turf tires.

[jhunsch 20]

Cut those old Turf tires.

Just for the heck of it, and for something to do.

I decided to try something different. It only took about 45min on each tire.

Should be interesting and fun when the pulls start again in late May 2013.

This is what I used, worked very good and fast.

Jeff

[1maidenfan 202]

WOW, that is cool!

[smoreau 658]

My luck I would have ran that air chisel right through the tire

Looks like it should work good, nothing wrong with that

[SousaKerry 503]

too bad my club won't allow cut tires ion the 10HP class. :confusion-scratchheadblue:

[jhunsch 20]

Thank you guys.

I think they will do allright in a pull. They are really dry rotted and not much good for anything else.

Neighter tire would hold air very long. And I must admit I did run the chisel into the tire. If you see my other post on putting 15x6x6 tubes in 22 inche rims thats me also.

Its what I had laying around so I gave it a try.

I am happy with the results so far it cost me $3 to have a good edge put the chisel.

Jeff

[welderman85 53]

nice work and great idea