bigfkd22 11 #1 Posted November 4, 2012 Does anybody know if a bervac 2 stage blower about 44 inches wide thats on a 520H will fit on a c-160? Sorry I dont have model number on the bervac. If I can get it off the guy Ill update this post. Also is a 16 horse one lunger enough to run it? Or am I stuck and need to hunt a 520 just to use it thanks d Share this post Link to post Share on other sites
Trouty56 565 #2 Posted November 4, 2012 I'm gonna say yes on both questions..... Share this post Link to post Share on other sites
stevebo-(Moderator) 8,060 #3 Posted November 5, 2012 I have a 38 inch ber vac on my 417. PO had it on a 310. I would say that you should have no problem with a 16. Share this post Link to post Share on other sites
JoeMonag 1 #4 Posted November 5, 2012 I run a '97 Wheel Horse 44" Two stage on my '86 416-8 with a rebuilt K34,. with no problem. Didn't get much use last winter. But the winter of 2011 it got a lot of use clearing my 400' paved driveway. Joe in Norton,MA. Share this post Link to post Share on other sites
bigfkd22 11 #5 Posted November 5, 2012 Thanks for the input! I feel better now. If I can get the deal sealed I'll put some pics up as I've never seen a bervac on a c series. Share this post Link to post Share on other sites
