Shynon 7,435 #1 Posted November 4, 2012 Anyone know who made this? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,503 #2 Posted November 4, 2012 Go to https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro and look at 32" models DP-861 Replaced by 7-1511, 7-1512, 7-1513 42" models 67-42DS01 Replaced by 77-42DS01, 87-42DS01 Garry Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted November 4, 2012 Going by the small picture, it looks almost the same as my WH one. Share this post Link to post Share on other sites
Shynon 7,435 #4 Posted November 4, 2012 Kelly My son has a Wheel Horse drag also, differences are this one has the chisels held in with a wedge. His has a clamp. Front bar on this one is flat iron and his has a piece of channel. This one has rivets and square nuts holding it together. Could this be an early Wheel Horse? Share this post Link to post Share on other sites
Kelly 1,028 #5 Posted November 4, 2012 I'll try to remember to look at mine when I'm out in the barn today, mine is a early/mid 60's model. Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #6 Posted November 4, 2012 Here's my Wheel Horse - branded harrow: It is (highly) possible that an 'outside' company made these for OEM manufacturers, just like trailers, moldboard plows, lawn sweepers, etc. Share this post Link to post Share on other sites
baerpath 517 #7 Posted November 4, 2012 I have the same one for use on a Sears 3pt. Going adapt it to WH 3pt so I can use it on the 195's So I think your right TT Duane Share this post Link to post Share on other sites
