YIKES! I screwed up the ignition switch

[RJR49 138]

C-160 but they are all pretty much the same.

My ignition switch is pretty worn out so I grabbed my needle nose pliers to remove one wire at a time to transfer to the new switch. Who would have thought that when I pulled the switch out of the dash ALL the wires came off! Screwed!

I have the C Series manual but the picture of the ignition switch doesn't clearly define the terminals. If anyone has a better schematic or lives near Cheshire Connecticut so I can look at yours I would appreciate some help.

I haven't scoped this out yet but there are 5 wires off the switch.

[rmaynard 16,372]

I believe this might be what you are looking for.

This is for a B-100 that does not have lights. The empty hole is for the lights (accessories). Be sure that you have the correct replacement switch. They are all NOT alike.

[Anglo Traction 761]

Your Ignition Switch is a 3 position (off/run/start), 5 Pin, Part number 103990. I assume there is no Connector Block holding the wires in their respective places. I have a diagram somewhere, but I'm sure someone will beat me to it.

[Save Old Iron 1,571]

[RJR49 138]

Old iron

That's perfect!

Randy

P.S I have a couple of rear tires in pretty good shape if anyone wants them