blackdogfarm 0 #1 Posted October 31, 2012 Been working on my engine. Took it apart and soaked the carb, replaced the float. Painted it up a little before putting it back together found all sorts of gunk in the engine fins. Hope it runs better. Before It was cutting out when I would hit a bump. Comments are welcome!!! more you comment... then the more pictures I will add as progress comes along. Share this post Link to post Share on other sites
1maidenfan 202 #2 Posted October 31, 2012 Looking good :happy-jumpeveryone:Sure hope I find the time to finish my 18 auto, I'm doing a complete restore. Sounds like you figured out your "cutting out" problem, thats where I would of started also. Might check electrical connections "grounds also" :text-coolphotos: Share this post Link to post Share on other sites
CasualObserver 3,411 #3 Posted October 31, 2012 Can you wipe off your camera lense next time? :hide: Share this post Link to post Share on other sites
blackdogfarm 0 #4 Posted October 31, 2012 sorry my cellphone sucks, i have a flip phone from 7 years ago. im old school Share this post Link to post Share on other sites
blackdogfarm 0 #5 Posted October 31, 2012 just got the mufflers on started right up!!!! runs smoother and does not cut out on rough bumps Seems to have a lot more speed too, but I dont know how the engine could have anything to do with that. I need to make a grill for it. since this was successful I need to find that bracket to attach a plow. Share this post Link to post Share on other sites
JackC 617 #6 Posted October 31, 2012 "I need to make a grill for it. They are available on eBay from time to time if you want to keep the original look. Share this post Link to post Share on other sites
1maidenfan 202 #7 Posted November 1, 2012 I still have an extra bracket if needed. :techie-eureka: Share this post Link to post Share on other sites