Jump to content
Sign in to follow this  
combinedmf

314-8 starting problem

Recommended Posts

combinedmf

I have a 1999 314-8 (73449) and I am hoping you guys can help me resolve a starting problem. For quite a while now the tractor starts fine when cold, but once hot it will not even crank. The lights come on on the dash but nothing else. If I let it sit and cool for a couple of hours it will start again. More recently it has started doing the same thing on an intermittent basis even when cold. Sometimes it will crank and sometimes nothing. Any and all help would be greatly appreciated.

Thanks,

John

Share this post


Link to post
Share on other sites
 
hbrooks49

On intermittent electrical problems with any equipment I always start by cleaning and checking all the high amp cables/ wires - battery, soleoid, starter, etc. That takes care of it 90 per cent of the time and is the quickest, cheapest, simplest thing to do. If that doesn't cure it you start troubleshooting one item at a time.

Share this post


Link to post
Share on other sites
 
Wheel-N-It

Check the ignition switch. Those things go bad more than you may realize.

If that doesn't fix it, then it probably needs to relocate to a warmer climate..................... Like where I live in North Carolina :woohoo:

Share this post


Link to post
Share on other sites
 
leeave96

John,

Would that tractor have a Kohler Command engine? Do you have any spark when it's hot? Sounds like an ignition module to me.

Nice tractor you got.

Bill

Share this post


Link to post
Share on other sites
 
combinedmf

It's not a spark issue. It never gets that far. The starter won't turn at all as if the PTO was engaged or the transmission wasn't in neutral or seat switch wasn't depressed. However, without changing anything other than letting it cool down, it will crank and start fine.

Share this post


Link to post
Share on other sites
 
JackC

"On intermittent electrical problems with any equipment I always start by cleaning and checking all the high amp cables/ wires - battery, soleoid, starter, etc. That takes care of it 90 per cent of the time and is the quickest, cheapest, simplest thing to do. If that doesn't cure it you start troubleshooting one item at a time."

I will second and triple that.

Share this post


Link to post
Share on other sites
 
combinedmf

Thanks guys. I'll check the high amp connections and report back if the problem persists. Thanks again for your help!

Share this post


Link to post
Share on other sites
 
dsholler

My 414 has intermittent problems like this, and I found that the bolt that holds the ground wires to the sheet metal on the tower seems to come loose pretty regularly. I am not sure if it is vibration or temperature, but I tighten it up and it works fine, and a couple of months later I have to do it again.

Share this post


Link to post
Share on other sites
 
leeave96

Good! You've ruled out spark as others have suggested time to dig a bit deeper into the electrical.

Ground as suggested is a great place to start. If it's good, then it might be a solenoid or the key switch. Can you test to see if your solenoid is working?

Share this post


Link to post
Share on other sites
 
can whlvr

i would have booster cables ready if it happens again and jump the starter direct from a good known battery,see if it turns over then,and will it start,let us know from there

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...