jabadamutt 9 #1 Posted October 10, 2012 Hello all, my dad passed away recently so I figure on restoring his old wheel horse. Am new to this community but it seems real helpful. I was wondering If anyone could help with wiring diagrams, i would appreciate it. I was also wondering if I could find the points and condenser from auto zone or if I had to go somewhere special. Cut my grass with it for the first time this past week end, had fun. It also has a two wheeled cart that came with it, In real nice shape. Share this post Link to post Share on other sites
jabadamutt 9 #2 Posted October 10, 2012 I forgot to mention, it is a 1977 B-80 8 speed. Tried to upload photo, but it was to large. Will see what I can do about that. Share this post Link to post Share on other sites
rmaynard 16,200 #3 Posted October 10, 2012 :WRS: Welcome to the madness. Sorry for your loss. Points and condenser are available from NAPA. Wiring diagram should be in the files section. Share this post Link to post Share on other sites
krazy_horse 59 #4 Posted October 17, 2012 Welcome to the forum you will learn much from these fellows. Your B-80 is a great machine. Share this post Link to post Share on other sites
jabadamutt 9 #5 Posted October 17, 2012 Thank you, I can't believe how much information I was able to find just by reading thru the forums and checking thru the files section. With a little searching, I was able to find every manual specific to this machine. I have my b-80 torn down with most of the parts in... These manuals have come in handy. Share this post Link to post Share on other sites
JimmyJam 542 #6 Posted November 10, 2012 Welcome! B-80 is a nice machine! Good Luck! Share this post Link to post Share on other sites
