608KEB 796 #1 Posted August 30, 2012 What kind of lube do I use for PTO? Grease from a grease gun? Share this post Link to post Share on other sites
rmaynard 16,343 #2 Posted August 30, 2012 The PTO should be lubed with wheel bearing grease, preferably a high temperature grease. No more than about a tablespoon full in the bearing cavity. Excess grease will run out and get on the clutch plate. Share this post Link to post Share on other sites
krazy_horse 59 #4 Posted September 1, 2012 The PTO should be lubed with wheel bearing grease, preferably a high temperature grease. No more than about a tablespoon full in the bearing cavity. Excess grease will run out and get on the clutch plate. Hello Bob, Do you by chance have a picture of greasing the PTO or direct me to where I can find out as I have never done this. Thank you,Jim Share this post Link to post Share on other sites
krazy_horse 59 #5 Posted September 16, 2012 , I tought my self how to do this yesterday on the B-80 as I had every thing apart to clean and install a new drive belt. Share this post Link to post Share on other sites
