damon91 7 #1 Posted August 17, 2012 Does anyone have any pictures and measurements of the linkages that lift up the dozer blade on a 68 commando 8. mine came with a blade, and I just tried putting it on for the first time. it not only seems to be missing the linkage but, im not sure how it would even go together. things dont seem to be lined up right. any help would be appreciated! thanks Damon Share this post Link to post Share on other sites
racinfool40 203 #2 Posted August 17, 2012 Got a pic or model # off the blade?????The Commando is a short frame tractor, So If you have the blade frame with 2 sets of holes on the rear you will need the rod in the 2nd set of holes towards the front of the plow frame. MIKE Share this post Link to post Share on other sites
COMMANDO1 23 #3 Posted August 17, 2012 first pic is in the furthest holes second pic is closest holes. plow is alot easier to lift (very) Share this post Link to post Share on other sites
damon91 7 #4 Posted August 18, 2012 thanks guys, I did notice the second set of holes but wasnt shure which ones to use. when I put the bar through the front set of holes everything lined up nice. I was able to make a piece of linkage from the plow to the lift lever. ill post some pictures as soon as I can get ahold of a camera. Damon Share this post Link to post Share on other sites
