nylyon-(Admin) 7,956 #1 Posted August 12, 2012 Last week while mowing with the 414, it began to act as though it ran out of fuel and died. Checked the tank and it was 3/4 full. So this week, I got on the tractor and tried to start it. It took a while but it did start and run fine for a while then began to chug. Remembering what TT often advises, I went to TSC today and bought a new gas cap, running like a champ! Share this post Link to post Share on other sites
rmaynard 16,343 #2 Posted August 12, 2012 I bought a new OEM gas cap for my Commando 8 at the Wheel Horse show back in June. The tractor ran fine during the show, and then when I got home I parked it in the shed. I got it out this weekend to get it cleaned up for the Olde Tyme Days show next weekend and it stopped running after about 30 minutes of "playtime". I looked at the cap and it appeared to have varnish clogging the hole. I guess that with today's gas with ethanol, we are going to have a lot more clogged vents as well as gummed up carburetors. Share this post Link to post Share on other sites
wallfish 18,188 #3 Posted August 12, 2012 The new gas sucks! It's both a blessing and a curse for us small engine guys. Share this post Link to post Share on other sites
rmaynard 16,343 #4 Posted August 12, 2012 The new gas sucks! It's both a blessing and a curse for us small engine guys. I'm not sure what the blessing is. :scratchead: Share this post Link to post Share on other sites
squonk 43,899 #5 Posted August 12, 2012 If your in the repair business it means a busy shop. Share this post Link to post Share on other sites
rmaynard 16,343 #6 Posted August 12, 2012 If your in the repair business it means a busy shop. Never looked at it like that. Kind of like being a doctor during flu season. Share this post Link to post Share on other sites
wallfish 18,188 #7 Posted August 12, 2012 Or finding easy to fix equipment cheap. Share this post Link to post Share on other sites
JackC 617 #8 Posted August 15, 2012 <<If your in the repair business it means a busy shop. >> One shop told me that 90% of the work they have been doing recently is cleaning carburetors. Another shop told me they don't bother cleaning them they just replace them. By the time they add up labor and repair kits, the replacement comes out the better deal. Share this post Link to post Share on other sites
oldredrider 2,553 #9 Posted August 16, 2012 I met an engine builder tonight and he said run the highest octane fuel you can find. High octane fuel sets longer in the tanks so additives to extend it's the life are added at the refinery. Also, less ethanol is added to it. Share this post Link to post Share on other sites