Jump to content
Sign in to follow this  
coldone

Spindle ID help Please

Recommended Posts

coldone

This deck came with my D160. Its in pretty sad shape but still mows well. I have patched a few areas and I am moving on to the spindles to see if can replace the pullies and one shaft. There are no ID plates or tags anywhere on the deck. It is 48 inch cut side discharge.

DSCF2904.jpg

DSCF2903.jpg

DSCF2902.jpg

DSCF2901.jpg

Share this post


Link to post
Share on other sites
 
JamesBe1

I am in the same boat. I got a 48 SD deck with no tags. I found a manual for a 48 SD deck for the listed attachment for a D-180 from Toro, and it listed the old double-D pulleys. I have 3/4" keyed pulleys on my deck, and almost bought the wrong expensive pulleys before I found that the part numbers listed in the manual weren't what I had. I ended up going to the yahoo group and looking through every manual they had for a 48 SD to see what pulley part numbers were listed. I am now trying to determine the specs for those part numbers, and I am pretty sure that the newer part numbers are for the appropriate pulleys that I need.

As far as spindles go, I hope to be able to get one of the bearings out intact enough to be able to read the part number off of it and order new ones. Hopefully out of six bearings, one should be readable. I don't know if there is a way to ID the spindles to determine the part numbers. If you find a way, I'd like to know. Not sure if it is really necessary as the spindle housing doesn't realy do much besides hold the shaft and bearings.

If you like, I can send you the seven or eight manuals that I got off the groups, hopefully one of them will give you something to go on.

Share this post


Link to post
Share on other sites
 
gwest_ca

Have you tried the spindle identification charts?

Deck models are 5-1220 replaced by 5-1221, 65-48XS01, 65-48XS02, 75-48XS01, 75-48XS02, 85-48XS01, 95-48XS00, 95-48XS01, 05-48XS01, 05-48XS02.

The 05-48XS02 sold out in June 1983 and kit 109091 was issued to convert the C-Series decks to work on the D-Series. 05-48MS02, 05-48MS03, 05-48MS04, 05-48MS05, 05-48SC01, 15-48SC01, 15-48SC02, 15-48SC03, 78360, 78361

Garry

Share this post


Link to post
Share on other sites
 
coldone

Have you tried the spindle identification charts?

Where can i find them?

Share this post


Link to post
Share on other sites
 
JamesBe1

Have you tried the spindle identification charts?

Where can i find them?

Me too please!

Share this post


Link to post
Share on other sites
 
gwest_ca

Added to the "Mower decks & reel" folder named

Chart Mower Rotary Spindle ID 1969-89

Clicking on a model number should take you to a page with the original spindle assembly used on that deck and any replacement assemblies.

Garry

Share this post


Link to post
Share on other sites
 
Don1977

Those look like the same spindles used on the 60" decks.

Share this post


Link to post
Share on other sites
 
JamesBe1

Added to the "Mower decks & reel" folder named

Chart Mower Rotary Spindle ID 1969-89

Clicking on a model number should take you to a page with the original spindle assembly used on that deck and any replacement assemblies.

Garry

On this site? I can't find it. I did a word search on 'Spindle', and didn't come up with any files even close to that.

Is it in the yahoo groups? Which group, and can download it from there.

j

Share this post


Link to post
Share on other sites
 
 
JamesBe1

I uploaded to this site.

It is also in the Files of

http://groups.yahoo....ctormanuals5_7/

Garry

Excellent! Thanx Garry.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...