jla1257 2 #1 Posted July 14, 2012 I purchased the below snow blade knowing that it might not fit my long frame 1257. It wound up not fitting, which I am fine with because I would rather have it attach to the axel instead of the Wheel Horse frame. Does anyone have the dimensions of a long wheel base plow frame so that I can build one? Purchasing one is not an option here in Mississippi because parts are non-existent. Needs to fit: Share this post Link to post Share on other sites
420-LSE 0 #2 Posted July 14, 2012 Click on the most viewed tab in Implements and attachment section and there are some posts on custom frames about halfway down the first page. Share this post Link to post Share on other sites
jla1257 2 #3 Posted July 14, 2012 I looked through those posts again, possibly I have missed it, but I have not seen any length measurements for the sides of the A frame. I know it is not exact science, but would like to have a rough estimate. Share this post Link to post Share on other sites
Don1977 605 #4 Posted July 14, 2012 The newer axle bracket is 11 1/2" wide and fits between the plow frame rails. The long frame is 64" from axle mount to blade mount. Share this post Link to post Share on other sites
