wheel horse pto clutch brake # 109346 for a wh 211-5

[trainman 0]

I am trying to find a new pto clutch brake from my wheel horse part number 109346 it is discontinued. I have looked on many web sites that sell wheel horse parts. Is there any place that will put a new liner on the brake? My tractor was built in 1984. would it be hard or possible to convert the pto to a electric pto? does anyone know if this part will interchange with any other wheel horse model close to mine?

[312Hydro 474]

I think you can get a new piece of brake lining riveted to it . Is it part 16 in this picture?http://www.partstree.com/parts/?lc=toro_consumer&mn=22-11B501%2C+211-5+Tractor%2C+1985&dn=810385R1-385R1038-00017 Some one here may be able to steer you in the right direction.

.

[tarcoleo 119]

You can buy clutch/brake material that will serve to line both the pto brake

and the tractor brake band. I attached both with brass rivets. The material can be

obtained as strips in various widths and when heated can be arched as required.

The non-metallic high-strength band material listed below is what you will need.

http://www.mcmaster....18/3511/=hzb4vi

Tom