roost 1 #1 Posted May 23, 2012 hello, fellow members i have a charger 10 and was wondering if someone knew how to cross my tranny filter to like a napa # or a other brand[ fram?] thanks for your help. Share this post Link to post Share on other sites
HorseWhisperer 243 #2 Posted May 24, 2012 FRAM ph16.It has a relieve bypass,same filtration and saturation microns and it screws right on!Fram has a neat little cross refference option on their website.very informative! Share this post Link to post Share on other sites
roost 1 #3 Posted May 24, 2012 thank you commandomayo! Share this post Link to post Share on other sites
can whlvr 994 #4 Posted May 24, 2012 if that filter is for the rear end ,do not use a filter that has a bypass,use a hydro filter,not an engine filter as they can open the bypass and let unfiltered fluid into the system Share this post Link to post Share on other sites
HorseWhisperer 243 #6 Posted May 24, 2012 Toro's recommended replacement has a bypass.If you neglect to change the filter it will allow flow with out damaging the pump.I think its a mute point because if you neglect it to that point,shame on you. Share this post Link to post Share on other sites
HorseWhisperer 243 #7 Posted May 24, 2012 I change mine so often at 4.99 a piece It doesn't hurt anything.I suppose I might have to go back to study group and choose a proper path.I have been corrected. Share this post Link to post Share on other sites
AMC RULES 37,210 #8 Posted May 24, 2012 http://dictionary.re...owse/moot+point Share this post Link to post Share on other sites
HorseWhisperer 243 #9 Posted May 24, 2012 BWAHAHAHAHA.English major too?I stand corrected twice! Share this post Link to post Share on other sites
AMC RULES 37,210 #10 Posted May 24, 2012 How'd you know? :teasing-poke: 1 Share this post Link to post Share on other sites
HorseWhisperer 243 #11 Posted May 24, 2012 When you cross reference part numbers on the Fram site it gives you PH16.I also cross# Cub cadet 923-3014 JD am-35176 Simplicity 1650954/171439 mtd 727-0162 Bolens 1726450 Wheel Horse 79-5270.25/30 micron 3.79h 3.660 od thread size 3/4-16.All of those hydros use the same filter according to the Fram cross# Share this post Link to post Share on other sites
AMC RULES 37,210 #12 Posted May 24, 2012 You gotta question the source. Sure those filters will work in this application, doesn't mean they're the best choice...that's all. Share this post Link to post Share on other sites
HorseWhisperer 243 #13 Posted May 24, 2012 I don't question authority anymore,all those models and parts numbers?Any way,I did a lot of homework and your saying I still get an F?I'm taking my ball and bat and going home! 1 Share this post Link to post Share on other sites
AMC RULES 37,210 #14 Posted May 24, 2012 I didn't kick you out of the sandbox, you get partial credit for the work you've done. :) 1 Share this post Link to post Share on other sites
Trouty56 567 #15 Posted May 24, 2012 I was just giving the guy a NAPA part number....shezzz..... 1 Share this post Link to post Share on other sites
AMC RULES 37,210 #16 Posted May 24, 2012 :omg: What happened to the old days when guys liked getting poked? :scratchead: Share this post Link to post Share on other sites
Rooster 192 #19 Posted May 24, 2012 What happened to the old days when guys liked getting poked? I think the new policy was called "Don't ask, Don't tell" ?? Personally I don't use anything Fram, I have seen and heard of too many of their filters causing problems. Share this post Link to post Share on other sites
