mrc 960 #1 Posted May 14, 2012 hi guys, lets say a 3, 4 or 500 series tractor had good paint but you wanted to change the decals. would you try and remove the current decals? if so, how? heat gun? or would you put a new set of decals on top of the original set? thanks mike in mass. Share this post Link to post Share on other sites
Ken B 3,189 #2 Posted May 14, 2012 A heat gun will get them off, you might have to use some acetone to get the adhesive off that was left behind. I wouldn't put the new decals on top of the old ones. Share this post Link to post Share on other sites
SousaKerry 503 #3 Posted May 14, 2012 heat gun on the back side of the hood, heat the metal not the decal, just be careful that you don't burn the paint. Share this post Link to post Share on other sites
varosd 1,185 #4 Posted May 14, 2012 my 520 front hood decal has been peeling in places and peels right off. not sure if the whole hood is the same. the PO looked like he had branches hitting the front of the hood which took off parts of the decal. Share this post Link to post Share on other sites