rj-35 questions

[ricksrj58 273]

i am rebuilding a 55 rj-35 that the PO cut off the hood stand and moved it forward 3 inches{ it is now junk}i am replacing it with one of a junk rj-58 frame,and the drive selector bar was cut off so we made a new one. my question is does the selector bar bolt to the engine or is it just welded to the hoodstand?if it is bolted to the engine also what engines will it bolt too a clinton or kohler k-90/91?anyone have a couple good pics of what i am asking about?

[stevebo-(Moderator) 8,541]

bolted down low (under frame rail) with a spring.

[stevebo-(Moderator) 8,541]

[stevebo-(Moderator) 8,541]

[buckrancher 2,695]

Rick if you are talking about the horz. bar with the speed position holes in it

it's welded to the up right hoodstand bar 6" from top of frame where the motor bolts down

I will try and get a pic for you and post it if thats what you are looking for

Brian

[ricksrj58 273]

thanks stevebo i thought there should be a spring.

Buckrancher i do need to know more about the horz bar,in stevebos pic it looks like it is bolted to the engine,but will it bolt to a k-90/91? i have lots of them but no clintons.

[stevebo-(Moderator) 8,541]

It is part of the frame has nothing to do with the motor. Le me see if i have more pics.

[stevebo-(Moderator) 8,541]

[buckrancher 2,695]

only pic I have at the moment

[ricksrj58 273]

Buckrancher thats the perfect pic, the bar is only bolted to the beltguard.we might have figured this out after getting stuff welded back in the proper places and thanks to you guys it is one less thing to worry about FOR NOW lol

[buckrancher 2,695]

heres a good side view

Brian