KC9KAS 4,744 #1 Posted April 27, 2012 I have installed a snow/dirt plow on my GT-14 and think there may be something missing on the hydraulic cylinder. I can't figure out what/how to hook the plow frame to the cylinder to lift it. Anyone have pictures/suggestions? Share this post Link to post Share on other sites
SALTYWRIGHT 861 #2 Posted April 27, 2012 YOU CAN USE A BAR FOR DOWN PRESURE OR A CHAIN FOR FLOAT. I USE A BAR FOR DOWN PREASURE ON MY GT-14. IT GOES FROM THE PLOW FRAME TO TO THE ROCK SHAFT. RUSS Share this post Link to post Share on other sites
KC9KAS 4,744 #3 Posted April 27, 2012 When the cyclinder moves, the bar that it is attached to moves forwards and backwards. This is why I think something may be missing. As the cyclinder extends and retracts, something should move the blade up and down, but I don't see what that part might be. Share this post Link to post Share on other sites
