multihobbyguy 35 #1 Posted April 15, 2012 I am working on my C 160 and I am getting ready to replace the exhaust. My question is should it have a reducer screwed into the block? Here is a picture of the exhaust. I am not sure if someone did this or if the factory did this. The reducer seems wrong in my mind but I really have no idea. Thanks, Chris. Share this post Link to post Share on other sites
bowtiebutler956 650 #3 Posted April 15, 2012 That's a good looking C-160 you got there. Matt :flags-texas: Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted April 15, 2012 I have 4 C-160's they all have it. Share this post Link to post Share on other sites
whc160 80 #5 Posted April 15, 2012 My three C-160s have the reducer also. Share this post Link to post Share on other sites
AMC RULES 37,196 #6 Posted April 16, 2012 :text-coolphotos: Puttin' a stack on it? :popcorn: Share this post Link to post Share on other sites
multihobbyguy 35 #7 Posted April 16, 2012 Thank you for the answers. Thanks for the comments. No, stack for me. I was trying to find a factory exhaust but it says NLA on all the websites that I have checked so I am not sure what I will do now. The muffler that is on there looks great but sounds like there is nothing left inside when I throttle up. Share this post Link to post Share on other sites
can whlvr 994 #8 Posted April 16, 2012 i have a 75 and its model is 1-0481,at parts tree they list it,102258,its not cheap but its available 152.29,i want to get one as im gathering every thing to do a complete resto to mine and thats why i know they SAY they have it,worth looking into,let us know so we can see if its still avail Share this post Link to post Share on other sites
bo dawg 518 #9 Posted April 16, 2012 yeah all mine has the reducer too. The mufflers are still going to be sort of loud on those single cylinders, thats why a lot of guy's try the bigger stacks to quite them down. But to me their still loud also. The only way to get a better quiter sound is with a twin cylinder engine for me. Share this post Link to post Share on other sites
multihobbyguy 35 #10 Posted April 16, 2012 I looked at the muffler on parts tree. I would have to order part 10-49 in addition to the muffler for a total of $207. I then noticed that it gave a another number that replaces the original item. So I looked up my original and it had a replacement but it runs $202. That it a little much for me. If I were to ever do a total restore I might purchase one. I think for now I will do a round 3 inch out the side. Then I may cut the one that is on there in half and see if I can re-baffle it. The outside is really nice with no holes so I think I cold re-weld it after I cut it. Share this post Link to post Share on other sites
JackC 617 #11 Posted April 27, 2012 The exhaust on my C-160 is loud. The baffles inside the original muffler were making a banging sound so I bought a used muffler to replace it. If you are able to fab something, maybe you could get a quiet muffler and put it inside the original casing? A quiet C-160 with something that looks like the original muffler would be a great accomplishment. Jack's sells quiet mufflers. I have not really looked into them. http://www.jackssmal...tmuf_index.html Possibly the side mufflers on some of the newer tractors would be quieter. Here is a C-160 with a side mounted muffler. Share this post Link to post Share on other sites
multihobbyguy 35 #12 Posted April 29, 2012 This is the route I went for the time being. It is much quieter and sounds better now. I saved the old muffler in case I ever decide to cut it open. Share this post Link to post Share on other sites
can whlvr 994 #13 Posted April 29, 2012 i have those on a few of mine,a cheap way for the time being Share this post Link to post Share on other sites