wh 4567 replacement bearings for idler pulleys.

[Martin 2,133]

does anybody have a source for these bearings? $40 from my toro dealer is steep.........

they measure .375" id x 1.375" od x .44" wide.

ive got two i could use, managed to get some grease inside them, but the shield buckles and doesnt go back how it should. rather replace them if possible.

any help much appreciated. napa couldnt get anything. ive been searching bearing houses and nothing. a number or something would be a great help.

they have nice 7842-4 on the shield.

[Martin 2,133]

im going to look into an common

5/8" ID x 1.375" OD x 7/16" W

sealed bearing and use a 3/8 x 5/8 bushing to get the id right.

.

[buckrancher 2,694]

mcmaster -carr looks to be a good place to get them you can get ID choices from 7/16 id thru 5/8 for under $10 each

[Martin 2,133]

thanks brian, i havent bothered looking at mcmaster carr yet. i try and let some wants build up so i can get a big order in. dont really need that much right now. maybe that will change soon.......

napa have a 7-04199 that is 5/8 id for $7 something so i could go that way, and get a 3/8 to 5/8 bush.

i managed to find two old wh ones that have freed up somewhat, i could work on them with some lube, so i might try and get a season from them....