Jump to content
Sign in to follow this  
hym123

Engine hunting

Recommended Posts

hym123

I restored my c120 with a teky twelve horse ,I rebuilt the carb and if you have read my other post i installed a wells chrysler ignition system in it due to the fact you can't find solid state ignitions any more , i rebuilt the carb when the engine is at mid throttle it hunts but not at idle or full throttle i sprayed throttle shaft with carb cleaner it hunts when i spray it could this be my problem? just don't know why it only hunts at mid throttle other than that it fires right up easy and has great power any one have any idea's Should i take carb all apart and re clean really don't want to

Share this post


Link to post
Share on other sites
 
AMC RULES

Did it run like this before the carb was rebuilt? :scratchead:

Share this post


Link to post
Share on other sites
 
hym123

Did it run like this before the carb was rebuilt? :scratchead:

No don't think so but it also ran really bad that is what started the restore come to find out it was my ignition thaat was bad i thought it was blown up but what i found out it was a combo of mis adjusted governer carb high jet and ignition after putting ignition in with the help of chuck from save old iron set the timming correctly i have tweeked the jets on the carb,and throttle cable, just hunts a little bit

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...