Wheelhorse84 87 #1 Posted March 17, 2012 So i am trying to adjust my carb, it lets out a puff almost like a skip or sputter every now and then from the exhaust when i rev out and even sometimes at idle. I turned the screws all the way in and then turned them out 2 to 2 1/2 turns out. Then made adjustments till it got smooth but then came the skip sound periodically.I still can't get it to run perfect when i go from high idle to low it backfires a flame out the exhaust. Its a 16 hp k-341 Help please :banghead: Share this post Link to post Share on other sites
Sparky-(Admin) 19,680 #2 Posted March 17, 2012 Steve, have you read the info in the link in this thread? This thread helped me get my C-165, which barely ran, running right again. Mike........... Share this post Link to post Share on other sites
can whlvr 991 #3 Posted March 18, 2012 definatly read that,sounds like a worn throttle shaft Share this post Link to post Share on other sites
BOWTIE 226 #4 Posted March 18, 2012 HELLO, I HAD THAT SAME THING ON MY KOHLER. THE SPARK PLUG CENTER ELECTRODE WAS LOOSE. IT WOULD GO UP AND DOWN WHEN RUNNING, BUT LOOKED GOOD. GOOD LUCK BOWTIE IN OHIO Share this post Link to post Share on other sites
Wheelhorse84 87 #5 Posted March 18, 2012 thanks guys Share this post Link to post Share on other sites