Jump to content
Sign in to follow this  
fourwheels0

drive belts

Recommended Posts

fourwheels0

sorry guys but i'm just a little bit peived.

after trying many belts from TSC i've come to the conclusion that they suck!!!!!!!!!!!. either too short or too long.

i have yet to find one that fits a c-160,c-120,1973 model 14 (these should be the same belt OEM #7473)or c-81. all 8 speeds.

my local wheel horse dealer's are useless (they tell me over a month to get one).

i buy and sell a lot of tractors and need to find a good reliable source to get belts.

the search continues.

rant over haha.

Share this post


Link to post
Share on other sites
 
WH854

sorry guys but i'm just a little bit peived.

after trying many belts from TSC i've come to the conclusion that they suck!!!!!!!!!!!. either too short or too long.

i have yet to find one that fits a c-160,c-120,1973 model 14 (these should be the same belt OEM #7473)or c-81. all 8 speeds.

my local wheel horse dealer's are useless (they tell me over a month to get one).

i buy and sell a lot of tractors and need to find a good reliable source to get belts.

the search continues.

rant over haha.

7473 belt is 5/8" by 82" long I just got one at TSC :thumbs:

Chas

Share this post


Link to post
Share on other sites
 
fourwheels0

wh854 i just got that same belt and it's too short to fit my 73 model 14.

i got the 83in one too but it was too long.

in over 1 year i've never found a belt that fits from TSC. i'm done with them.

i'll search the net and order an oem belt.

Share this post


Link to post
Share on other sites
 
whc160

I get mine for my 160's at NAPA part #5l820w and it is a heavy duty belt.

Share this post


Link to post
Share on other sites
 
squonk

7473 crosses to a Napa 5l820w which is 5/8" X 1/2". I can't believe a 1/2" would make such a difference as one too long and the other too short. Did you check and make sure the belt in the package had the right # on it? Someone could have returned it and put it in the wrong sheave. I used to work at Napa and it happened a lot. I just bought a TSC belt for my mower deck and it fit perfect.

Share this post


Link to post
Share on other sites
 
fourwheels0

thanks i'll try out napa.

Share this post


Link to post
Share on other sites
 
smoreau

I find oem belts on evil bay, then check with my local dealer and if the price is cheaper online I will get it there. if not I get them from the dealer. I have a spare for all the tractors and some cover more then 1 tractor. Nothing fits like original equipment belts, and nothing last longer then oem. my :twocents-twocents:

Share this post


Link to post
Share on other sites
 
kloe0699

I just picked up 2 oem drive belts from my dealer. They were cheaper than I could find them online. I have tried other belts before but the oem ones always seem to work best. Just my opinion.

Share this post


Link to post
Share on other sites
 
can whlvr

one month from the dealer,they dont want your buisness very badly,im in canada and i get a belt in a week,1 day if i drive to the warehouse myself(my dealer lets me pay them and go to toro wamrehouse and pick it up myself if im in a rush)

Share this post


Link to post
Share on other sites
 
kloe0699

Things are different everywere I guess. My closest dealer is an hour away, before I go there I call a few days ahead with a list of part numbers. They usually have what I need in stock. If not it's there the next day, before I get there of course.

Share this post


Link to post
Share on other sites
 
Kelly

No OEM belts are ok for decks and other stuff, but I've found for a stick shift tractor the OEM belt is the only way to go, might cost a few $$ more than the TSC belt but if it fits right the first time and you take care of it, it will last for years and years figure the factory belt on it probably lasted 30 years + - a few

Share this post


Link to post
Share on other sites
 
chris hall

i bought a 7473 belt at my toro dealer and it lasted only one season. i guess it grew alittle somewhere. i have never bought anything but factory belts but, this makes me wonder.

Share this post


Link to post
Share on other sites
 
ericj

I've use Goodyear belts with no success like stated earlier wheel horse used 1/2 size belts. the only belts that i had any success with other than o.e.m. was the blue belts. I had a 310-8 that had belt problems. so i bought a brand new o.e.m. only to have the tractor eat my $30.00 plus belt,ouch!!!!. i replaced the idler, even though it didn't seem bad and put a blue belt on it and never had a problem with it again, it is still on the tractor and gets used.

eric

Share this post


Link to post
Share on other sites
 
radarme

I've got a new Gates 7473. I bought it a month or so back and it was the wrong part num for my C-121. I was planning to return it but I can ship it to you if you are interested.

Share this post


Link to post
Share on other sites
 
fourwheels0

I've got a new Gates 7473. I bought it a month or so back and it was the wrong part num for my C-121. I was planning to return it but I can ship it to you if you are interested.

thanks for the offer but i just ordered a 5L820w from napa and it should be in in the morning.

if it doesn't fit i'm done with it.

Share this post


Link to post
Share on other sites
 
fourwheels0

well i got a belt from napa the 5L820w and it fit perfect.

amazing how 1 82 inch belt won't fit and another will.

i'll never go back to TSC again.

Share this post


Link to post
Share on other sites
 
MaineDad

Glad it worked out. I use Napa for almost everything...

Share this post


Link to post
Share on other sites
 
squonk

I sold those "W" series belts for 10 years at Napa. They are indestructible. Every time some one bought one and returned it because it broke I had them bring the deck in. If I couldn't find something wrong with the deck they got their money back plus another belt. I never had to give one away. I still bet that TSC belt was either marked wrong on the belt or in the wrong package.

Share this post


Link to post
Share on other sites
 
SNYFIX

Is your engine tight on the base ?? OEM belts are the best because for one,

the factory designs/builds the tractor and then the belt manufacturer makes

a belt to fit so many belts are fractional in size. Next is the aftermarket belts

won't have the cords in them for strength especially needed for the friction

heat generated by mowing for example.

Share this post


Link to post
Share on other sites
 
squonk

The Napa "W' series green belts and the TSC Blue belts have Kevlar cords. How much strongrer do you want them? :scratchead:

Share this post


Link to post
Share on other sites
 
SNYFIX

The Napa "W' series green belts and the TSC Blue belts have Kevlar cords. How much strongrer do you want them? :scratchead:

Not the "strength" per se but how they "stretch out" and wear under

the friction/heat demands of mowing. Obviously dull blades/heavy/wet

grass/pulley drag puts a lot of demands on a cutting system.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...