formariz 12,045 #1 Posted February 27, 2012 Does anyone have a photo of what the tilt lever for the snow plow looks like on a c-105? Thanks Share this post Link to post Share on other sites
can whlvr 994 #2 Posted February 27, 2012 do you need measurements as well? Share this post Link to post Share on other sites
formariz 12,045 #3 Posted February 27, 2012 That would definitely help.What I have is interfering with the brake pedal.I wonder if I have the correct setup. Share this post Link to post Share on other sites
can whlvr 994 #4 Posted February 27, 2012 first thing is to see if turning it around will help,sometimes people put them on backwards,heres some pics with a tape beside,dont have a full view though,maybe these will help Share this post Link to post Share on other sites
formariz 12,045 #5 Posted February 29, 2012 Perfect.I really appreciate it. I now know I have the wrong lever. How deep and how long is the notch in front of bar? Also how long is the bar attaching it to plow? Thank you again Share this post Link to post Share on other sites
meadowfield 2,758 #6 Posted February 29, 2012 doh ! missed this, I've posted a diagram and alternative pictures ! mark Share this post Link to post Share on other sites
formariz 12,045 #7 Posted February 29, 2012 doh ! missed this, I've posted a diagram and alternative pictures ! mark Definitely interested in alternative solutions.Did you post the diagram? Can not see it Many thanks Cas Share this post Link to post Share on other sites
meadowfield 2,758 #8 Posted February 29, 2012 other thread, DIY plough lever... mark Share this post Link to post Share on other sites
can whlvr 994 #9 Posted February 29, 2012 i built one once,still have it and it was fairly easy,there is a kick back towards the operator so it doesnt hit the pto when forward,heres a full pic and the one pic there shows how much angle the lever has towards the back Share this post Link to post Share on other sites
can whlvr 994 #10 Posted February 29, 2012 its the pic with the wood going up,thats how much backset in the toal from where it is joined at the 2inch kick Share this post Link to post Share on other sites
