dual wheel kit #80732

[duelldanz 1]

just bought out a dealer that folded and got a brand new 80732 dual rear wheel kit, instructions don't say what tractors it will fit only they must have 1 1/8 axles & 8 pinion differentials one side of instructions is for hydro the other side i'm guessing is for standard trans. does anyone know what they fit & about what they are worth?

[Sparky-(Admin) 24,031]

I doubt the tranny affect what they will fit. All of our 12" rear rims should have the same 4 mounting holes. The width of the adapter is whats important. What this means is that if the kit was designer for a 520 with 10.5 rear rubber it will give you the proper spacing between the two tires. If the same kit was used with a pair of 6x12's on a 60's vintage tractor you would end up with a huge gap between the two tires.

Got any pics of the adapters or maybe the manual/instructions? Does it have pics of a particular tractor in the paperwork?

Mike...........

[duelldanz 1]

THE SPACERS ARE 11 INCHES LONG BUT PART OF THE KIT INCLUDES NEW AXLES. THERE IS NOTHING IN THE INSTRUCTIONS ABOUT WHAT IT FITS BUT LOOKS LIKE A TRACTOR WITH A HYDRO NEEDS AXLES REPLACED AND SAYS TO REFER TO TRANS REPAIR MANUAL 810 243R2.

[Old Horse Junkie 0]

Mine are 11" too. I had made a shorter spacer but found mud was a problem piling up between the tires, causing the tires to spin. I recently put ballast in my tires giving it conciderably  more traction.