1maidenfan 202 #1 Posted February 11, 2012 Not sure if this will work so I thought I would ask the people with the knowledge. I am building my own F.E.L. and dont have a control valve(loader valve)and was wondering if I can use a spare impliment valve that I have. Thanks, John Share this post Link to post Share on other sites
KC9KAS 4,744 #2 Posted February 11, 2012 I would think that will work. A single hydraulic valve has 3 (or 4) ports....Flow into the valve then either directed to the resorvior or one (or 2 directions for the cylinder.....assuming a double acting cylinder.) I certianlly would try it. Share this post Link to post Share on other sites
rexman72 210 #3 Posted February 12, 2012 hopefully you will keep us updated with pics on the process on building the FEL Share this post Link to post Share on other sites
1maidenfan 202 #4 Posted February 12, 2012 hopefully you will keep us updated with pics on the process on building the FEL I am waiting on hyd. hoses on the loader build and before I can re assemble the loader I have to finish the resto job I started on the tractor(18-auto). Will post pic's as I get to that stage. Thanks for the interest. I do have pic's posted on here of my progress so far. "Loader build for my '73 18-auto" , search this should get the pic's. Share this post Link to post Share on other sites
