WHEEL HORSE BILL 7 #1 Posted February 5, 2012 In very bad shape going to be a parts tractor if you guys need anything let me know it came with no mowerdeck for $200. I was dumb for even picking it up but it was a far drive and I didn't want to go home empty handed. WHEEL HORSE BILL :angry-banghead: Share this post Link to post Share on other sites
AMC RULES 37,211 #2 Posted February 5, 2012 Where in Mass are you located Bill? Share this post Link to post Share on other sites
wallfish 18,241 #3 Posted February 5, 2012 I might be interested in the tranny. Does the motor run? Share this post Link to post Share on other sites
Hodge71 675 #4 Posted February 5, 2012 Bill, the way I look at it, youre smart for realizing its a parts tractor and selling it from the beginning. It could be worse, you could sink a ton of money into it trying to get it usable and then realize that was a mistake. Recoup your losses and move onto something better. Share this post Link to post Share on other sites
Forest Road 594 #5 Posted February 5, 2012 If it's a kohler I might be interested Share this post Link to post Share on other sites
Tim 97 #6 Posted February 5, 2012 i'm interested in the front axle and front tires (want to put larger tires on my 314-8) please let me know where to look at it, pick it up and how much Share this post Link to post Share on other sites
AMC RULES 37,211 #8 Posted February 5, 2012 :text-yeahthat: :popcorn: Share this post Link to post Share on other sites
WHEEL HORSE BILL 7 #9 Posted February 5, 2012 I know you guys want pictures but I have no camara sorry.I do have a good tranny,front axle,rims tires are no good,motor is all there. please send me a message and I can give you my number thanks.I am located in swansea ma Share this post Link to post Share on other sites
can whlvr 994 #10 Posted February 6, 2012 just curious if the engine runs,is it a kohler or onan,if its a kohler it could be as simple as carbon holding a valve open,i got one this year like that,or it could be completely trashed?,sometimes worth pulling the head Share this post Link to post Share on other sites
JoeMonag 1 #11 Posted February 7, 2012 Bill. I have an '86 416-8, I'm located in Norton, MA . Do yo know the year of the tractor? Mine has the K series K341, that I recently had rebuilt. I might be interested in some parts. Joe Share this post Link to post Share on other sites
