Prater 75 #1 Posted January 27, 2012 I am checking all the fluids on the C-111 and 36" tiller. I know the tiller uses 90 weight lube, but how do I tell if the case is at the proper fill level? Should I be able to touch the lube with my finger, or is there a plug on the side that I need to pull and top off to that plug? I think its low but I cant tell for sure. Thanks Share this post Link to post Share on other sites
tgranthamfd 28 #2 Posted January 27, 2012 I wasn't sure either, so I just drained and filled. Share this post Link to post Share on other sites
Lugnut 0 #3 Posted January 27, 2012 My manual says to pull the bottom plug and if any oil runs out it has enough. Share this post Link to post Share on other sites
dennist 139 #4 Posted January 27, 2012 This is from the manual on the 36" tiller-Hope it helps-- Share this post Link to post Share on other sites
Daddy Don 893 #5 Posted January 27, 2012 Thanks, Dennist, can you scan a pic of the fig 1 and 15? Thanks again. Share this post Link to post Share on other sites
dennist 139 #6 Posted January 27, 2012 Here is fig. 1 Share this post Link to post Share on other sites
dennist 139 #7 Posted January 27, 2012 Here is fig.16, which is what I think you meant, if not just ask me for 15 also. Share this post Link to post Share on other sites
can whlvr 991 #8 Posted January 28, 2012 i find it stange that they say no oil changes are needed,its working in a dirty,dusty environment,changing the oil is important if you ask me,my dealed said that to me once about the rear end oil,oh you dont need to change it,WHAT :omg: Share this post Link to post Share on other sites
Prater 75 #9 Posted January 28, 2012 Thanks again, I understand on the oil. We have used this tiller for a few years now and the oil still looks new. I meant 16...Thanks Share this post Link to post Share on other sites