pfrederi 17,147 #1 Posted January 21, 2012 Some snow plows have 3 angle positions, some have 5. Five is nicer, is there any reason I can't just drill two more holes (in between the existing ones)in the sector??? Share this post Link to post Share on other sites
rmaynard 14,909 #2 Posted January 21, 2012 Seems like a reasonable thing to do. Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted January 21, 2012 I have both and if you drill out the 3 hole to the 5 there will be very little metal left between the holes, the 5 hole index they start farther over, the blade angles a bit more than the 3 hole index, but I do like the 5 hole set up better, they only as far as I know came on the newer 48" blades. Share this post Link to post Share on other sites
pfrederi 17,147 #4 Posted January 21, 2012 Thank you that was what I was afraid of ..lack of metal left. I made a mistake and loaned out the plow with the 5 index to a neighbor and left myself with the 3. No good deed goes unpunished Share this post Link to post Share on other sites
rexman72 210 #5 Posted January 21, 2012 its karma buddy and it will come back to you for doing a good deed Thank you that was what I was afraid of ..lack of metal left. I made a mistake and loaned out the plow with the 5 index to a neighbor and left myself with the 3. No good deed goes unpunished Share this post Link to post Share on other sites
Kelly 1,028 #6 Posted January 22, 2012 At least you said loaned, not sold. Share this post Link to post Share on other sites
