After draining the old molasses out of my transmission, quickly flushing with diesel and refilling with 85-W140 my left rear axle and input shaft seal drip a little each day.
Thanks to this forum I found the seals I need at Napa, but am a little nervous pulling off the input shaft pulley without damaging the pulley itself. Any advice/write-ups on this?
This photo is as I bought the tractor. Am I missing a bolt and washer?
Thanks for the help guys!
I'm rebuilding a Sundstrand #90-1136 that came out of my 1974 WH B-100. I Found this company www.novahydraulics.com that has the entire rebuild kit PN / 99890. It shipped quick too. Gordy is the man you want to talk to regarding Sundstrand units. Good hunting all.