Jump to content
Sign in to follow this  
dandan111

Storing the 314

Recommended Posts

dandan111

I have not been using my 314 for about 2 years now. I bought this new and want to keep it,I start it every great once and awhile. Anyway the battery is dead and I have been thinking maybe I should add some treatment to the gas and let it just set? I love my round hood,it's all I use,at the same time my trusty 314 just sits. I know its not worth what I paid for it And I would like the kids to have it.So what's the best way to store it?

Share this post


Link to post
Share on other sites
 
Sparky

If it going to sit as long as it sounds get ALL the gas, treated or not, out of it including the carb. Take the battery out and stick it somewhere with a cover to keep dust and crap off it.

Mike............

Share this post


Link to post
Share on other sites
 
dandan111

I think the battery is on its last leg from not being used. The tractor is in a nice little shed but no heat. So drain all gas and leave it dry?

Share this post


Link to post
Share on other sites
 
kloe0699

As Mike said, get all the gas out of the carb. You could put some stabil in the gas and run it till it's out of gas. The battery might have some life in it. Get it into a warmer location for storage. Let it trickle charge before you use it again.

Share this post


Link to post
Share on other sites
 
sorekiwi

My push mower, tiller and "mighty mac" get the storage treatment late every fall.

I drain the fuel, then run them till they run out of gas. Then I take the spark plug out and squirt a couple of squirts of engine oil into the bore and rotate the engine a couple of revolutions to distribute the oil, then put the plug back in. I usually change the crankcase oil at this point as well, if not I will change it in the spring when I get them going again.

Then I tape a note on the top of the engine telling me what I've done, 'cause I know I wont remember when I drag them out again.

Share this post


Link to post
Share on other sites
 
Kelly

All the above, and I might think about a few mouse traps or at least poison if it's going to set a long time, I would change the oil if it's going to set also, run it till it's warm, then drain put fresh in, old oil can be somewhat corrosive if it has a any gas content it it and all old oil has some, as a by-product of a running engine.

Share this post


Link to post
Share on other sites
 
Jake Kuhn

Theres a complete b100 at mine but I haven't looked at it or asked about it. I havent asked because I tried to buy a jd 110 for parts and the motor was seized didn't even know if the trans was good body was really rough and missing a bunch of pieces $150 :omg: Jake

Share this post


Link to post
Share on other sites
 
dandan111

Thanks,I will need to charge the battery to get it up and running . I suspect it will set for a long while after this,I just can't sell it after shelling out $3500 for it.(I guess that was like 13 years ago)

Share this post


Link to post
Share on other sites
 
Duff

Just a thought - if it's going to be sitting for a great length of time, I'd also give the painted surfaces a good waxing with a quality auto paste wax then cover the machine with something. Dittos as well on some form of anti-vermin treatment as mice love to build nests under the shrouds of the engine as well as chew on the wiring.

Duff :handgestures-thumbup:

Share this post


Link to post
Share on other sites
 
BOWTIE

HELLO, YOU WILL ALSO NEED TO KEEP YOUR EYES ON THE TIRES. TAKE THE WEIGHT OFF THEM IF YOU CAN'T KEEP THEM AIRED UP, THEY WILL LEAK DOWN, THERE IS NOTHING ANY WORST THEN THE TIRES SETTING FLAT WITH NO AIR. THE SIDEWALLS WILL CRACK.

BOWTIE IN OHIO

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...