ricksrj58 273 #1 Posted January 2, 2012 the one against the tailgate has no tag on it,can anyone id it ? the other blower is a st-326 and there is no lift rod.i have never had a blower so i do not know what the rod looks like.can i make one out of angle iron and what are the mesurements? i seen a pic of where it attaches to the blower but how does it mount to the tractor and lift,can someone post a pic?also there is only 2 pullys ,is that correct? i am putting this on a 857 if that helps. Share this post Link to post Share on other sites
Kelly 1,028 #2 Posted January 2, 2012 The blower we can see the most of looks like it's for a vert shaft tractor, I'll get pics of my lift tube and flag for my blower for my 855 the tube you can make from pipe or tubing, the flag there is a post here someplace on how to make one, I may have a tube and flag for the old blowers for a short frame tractor to sell, I'll have to check stock if your interested. Share this post Link to post Share on other sites
Sparky-(Admin) 19,674 #3 Posted January 2, 2012 This is the post Kelly is referring to. Mike............. Share this post Link to post Share on other sites
ricksrj58 273 #4 Posted January 2, 2012 i would be interested in the tube and flag if you have them as i do not have a welder. thanks sparky i saved those pics in case i need them someday. Share this post Link to post Share on other sites