2 Stage Blower Question

[Pollack Pete 2,273]

I recently got a new to me 44 inch 2 stage snow blower.The belt cover was included but not installed.It's held on by 3 bolts.The bottom 2 are easily accessable.The top bolt is "hidden" behind the belt guard.There's a small,like 1/4 inch hole in the cover to,I guess get at this bolt.The upper bolt is missing.Anyone have any idea what this cover takes for the upper bolt.Thanks for any info.

[Hydro 130]

It's a machine type screw, 1/4" thread with a 3/8" bolt head.

[Pollack Pete 2,273]

It's a machine type screw, 1/4" thread with a 3/8" bolt head.

Thanks for that info.Now........just how do you get to the bolt to tighten or loosen it? It's completely hidden by the belt

guard.There's a 1/4 inch hole drilled in the cover.Not nearly big enough for a socket to fit through.

[Hydro 130]

The cover goes over the outside and you just wrench the bolt in place. It's only 3/4" long. If you a problem send me another message and I will take a photo but I haven't been able to upload here so will send to your email.