Looking for close up of suburban plow pivot hardware please

[stevebo-(Moderator) 8,590]

All-

I have a plow on my 400 but is missing the proper angle pivot detent spring/rod. Can anyone post a pic of a close up of this? Thanks-

[tgranthamfd 29]

I had a couple of pictures, somewhere, of one I kinda bought but never got. Not sure if they would help you out, but I will keep diging around, see if I can find them. I think the set up was a 1960.

[tgranthamfd 29]

This is the link, where I think that I posted up the pictures before, but It wouldn't do anything this time. Probably lost in the move, as is some of my other pictures. You might be able to get somewhere with the link.

http://www.wheelhorseforum.com/index.php?showtopic=541

[tgranthamfd 29]

Steve I found the pic that I have, don't know if it will show what you need, though.

[tgranthamfd 29]

I think that the the pedal and chain is what releases the pivot on this particular style/model. I have seen other pictures on here that might be of better quality. I think TT may have posted some on here, not sure though. It has been a while back.

[wallfish 18,630]

The pedal does pull the chain to release the pivot and a small rope is used to swivel the blade.

Sorry I forgot about this Steve! Do you need the measurements for the pin also? I can get you a close up pic of it too.