Retired Wrencher 5,817 #1 Posted November 19, 2011 :dunno: Hi I have a 8/32 toro rear engine Brigs. I just had the carb redone buy my W/Horse dealer. it ran fine for a few days. Mowed a lot of leaves with it. then it just stopped, like the spark plug fell out. I thinking it may be a shifter contact?? as soon as I put it in gear it wants to stall after it warms up. I look at the wires it seems to be ok but again it only does this when the engine is warm. any info would help. Gary B..... Share this post Link to post Share on other sites
Retired Wrencher 5,817 #2 Posted November 20, 2011 Mods please remove as I have fix the problem Gary B............. Share this post Link to post Share on other sites
Sparky-(Admin) 23,219 #3 Posted November 21, 2011 Glad to hear its back in service Gary. What was it? Mike...... Share this post Link to post Share on other sites
Retired Wrencher 5,817 #4 Posted November 21, 2011 :dunno: Hi Mike there was some wiring issues withe motor. I did not see them the first time, I guess if hit the right bump it would ground out and kill the motor. Thanks for asking T/Care Gary B............ Share this post Link to post Share on other sites
Sparky-(Admin) 23,219 #5 Posted November 21, 2011 Sounds like a repair that didn't break the bank....those are the best !! Mike......... Share this post Link to post Share on other sites
Retired Wrencher 5,817 #6 Posted November 22, 2011 :dunno: Yes Mike it cost me a hole $4.00 for a in line fuse holder and $20.00 for the air filter because I could not find any filters that would fit in the stores. it is an oval in shape. so it is not the normal shape for a filter. T/Care and Happy T/Day. Gary B................... Share this post Link to post Share on other sites
