littleredrider 409 #1 Posted November 6, 2011 First pic is a 1045 I got my Matt (gnlark). Got a decent hood from Brian, (buckrancher) along with some other small parts. Debating on putting on a 10 horse, or go with a 12, 14, or 16 horse. Right now I have the HF 13 clone on there. Need something to move snow... Next is a 1055 I got for parts for the 1045, mostly complete and original. Little rough around the edges, but most are being 40+years old. This will most likely get parted. My daughter calls it the tractor with the pink seat.... Latest one just got yesterday. 1276, tried to get it running, but no spark. But I do think the hydro works, while cranking the engine over, lever must have been off, starting to go backwards. This one is already stripped down to the frame. Parting some pieces, keeping some. This one my daughter calls the one with the furry seat.....kinda comfy tho.... The sheet metal on the 1276 is gonna go on the 520 frame, with an 8-speed I got from a C-141. Gonna try to use the separate clutch/brake pedal off the 141 but see how it goes. Diesel is going on this too. Just need a non-hydro dash tower. Also couple weeks ago I posted an add on Craigslist looking for some horse parts. I got one call from a guy that had some stuff. Went there today to see what he had. Had some stuff, but nothing that I just had to have. (other than some hood ornaments) But walked into a shed, had some parts there, and had a motor sitting off to the side. Said that it threw a rod, but got looking and it had a small oil pan (which is what the 1045 uses). Checked the spec number, 46219A!! Sweet, now I have another small pan, small flywheel/bearing plate and blower housing, as well as the rest of the motor. So gonna get that in a couple weeks, along with some more hood ornaments and some snow plow trip springs. Figured $50 wasn't too bad for that. Share this post Link to post Share on other sites
HorseFixer 2,013 #2 Posted November 6, 2011 Looks like you can make a couple keepers outta them! ~Duke Share this post Link to post Share on other sites
tmix 34 #3 Posted November 12, 2011 Nice hall. Keep up the good work! tmix :dunno: Share this post Link to post Share on other sites